Wheel Spacer Installation Steps
Step 1-Removing Wheels and Inspection
First, you need to remove the bolts from the wheels using a wrench. But make sure to loosen them first and not remove them completely. Now, use a jack and a jackstand and place them under your vehicle. Once the jack is properly installed, remove the wheels and head to the next part.
Step 2- Installing the Wheel Spacers
The important step in installing the wheel spacers is to prepare the hub. You can use a wire brush to clean the hub and ensure there's a smooth area for the wheel spacer. Now, slide the wheel spacers on the lug nuts and make sure it is placed properly. Maintain the proper balance for the wheel spacers. The important thing here is to check if the wheel spacers are perfectly placed on the lug nuts.
Step 3- Prepare the Wheel Spacers and Reinstall the Wheels
Now you need to torque down your wheel spacers according to the instructions given on the box. However, if they are general wheel spacers, you can simply pull them to the left and you can easily complete this process here. The n ext step is to reinstall the wheels and tighten the lug nuts accordingly. Make sure they are firm to the wheel spacers and there is no space between them. Once they are installed properly.move to the next step.
Step 4-Performing the Checks
After lowering the vehicle and torquing the lug nuts, you need to inspect your vehicle to make sure it is ready to drive. For this, you need to inspect all the wheels individually to look for any loose nuts or imbalances in the wheel. After inspecting the wheels, check if everything is aligned with the axle and that nothing else is affected by the process.
How to Measure Wheel Spacers Size?
Step 1: Determine your vehicle’s wheel gap and Thickness.
To avoid touching and causing friction, the thickness ofspacers should be less than the fender gap. (The maximum thickness of spacer = the minimumfender gap - 12mm ) is recommended, it will not rub.
Step 2: Measure your vehicle’s Bolt Pattern and Center Bore
The diameter of an imaginary circle created by the centers of the wheel lugs is what is meant by the bolt pattern (PCD), which is, for example, “ 6x139.7 mm.” For example, “108 mm” is the diameter of the center bore (CB) of a vehicle hub and wheel.
Step 3: Determine your vehicle’s thread pitch.
Make sure that the bolts’ threads are compatible with the threads on your car. You should choose spacers with M14x1.5 bolts if your vehicle uses M14x1.5 bolts. Thread length should equal the thread length of standard bolts plus any additional spacer thickness if you require longer bolts.
FAQs on Installing Wheel Spacers
Q: Can you drive daily with wheel spacers?
Yes. You canuse a vehicle with wheel spacers everyday. All you need is to make sure they are perfectly installed onyour vehicle.
Q: How long can you drive with wheel spacers?
Most experts recommend you retorque the wheels after 100-120 miles of driving your vehicle. But there's usually no official limit for this and you can retorque the wheel spacers according to your convenience.
Are you looking for better quality wheel spacers?
Hexautoparts is the choice for you!
-Brand new and well packaged wheel spacers
-High tensile strength forged 606l-T6 aluminum
-Pre-installed 10.9 grade bolts can improve strength to ensure safety
-Increasing driving stability, making wider stance and giving a more aggressive
Tips Before Buying Wheel Spacers
1.You need to choose wheel spacers with a suitable thickness according to the measurement the fender clearance. For specific methods, please refer to the above content for details.
2.Before purchasing whee spacers, you need to check the model carefully. Please confirm whether it is compatible from the model search box at the top or check the model from our description details.
Installing spacers on car is not complicate, it's same as changing a tire, generally speaking, it only need 1-2 hours to complete. Hope this car wheel spacers installation guide can make you safe on the road.
