How to Remove and Replace Honda Accord Alternator

Car Alternator is a key part of a car charging system,which is bolted to the engine and driven by a serpentine belt or drive belt. The alternator function is to charge the battery and provide electric power for car’s electrical components when engine is running. Knowing how to remove and replace an alternator can save your much replacing alternator cost. Now,let us start learning the following steps to replace honda accord alternator.

You will need some tools when installing your new accord alternator,including:

-serpentine belt tool

-socket

-ratchet

-wrench

How To Tell If You Have A Bad Alternator?

-Dimming or Flickering Lights

-Weak or Dead Battery

-Alternator Noise

More Symptoms of a bad alternator, click HERE.

How to Remove and Replace Honda Accord Alternator?

In general, it will take about two hours for you to install a honda accord alternator on your own, though this could vary somewhat depending on your knowledge of car mechanics.

Step 1: Disconnect the battery

Locate the battery and disconnect the negative battery cables is the first step,which can avoid grounding a live wire and potentially dangerous that you don’t want.

Step 2: Locate the alternator

Locate the alternator and use a serpentine belt tool to remove the belt off the pulley of the alternator. Try as carefully as you could, otherwise the belt could be damaged.

Step 3: Remove the bolts

There will be about 3 bolts or more depending on your year of honda accord holding your alternator in place. You must remove these bolts with a socket and a ratchet.

Step 4: Loosen and remove the alternator

After the removing bolts and disconnecting nuts,pull out the old alternator carefully.

Step 5: Install the new alternator

Buy your new alternator replacement from HexAutoParts.com with no core charge for your Honda Accord. Get started HERE.

Step 6: Reverse the removal steps

To complete the whole project, you should reverse the removal steps.

-Plug in the nuts for the electrical connections.

-Re-insert the bolts you removed with the socket and ratchet to bolt the alternator back into place.

-Use the serpentine belt tool to carefully put the belt back on the alternator pulley and pay careful attention to belt routing and tensioning.

-Re-connect the positive battery cable.

Step 7：Charge alternator

Start your accord to make sure the new honda accord alternator is in fact charging. If you have any questions,please feel free to CONTACT US, we are always here to help you.