1 inch 4x156 Wheel Spacers 131mm Hub Bore 3/8"-24 Studs For Polaris Ranger Sportsman RZR 2pcs
Polaris 4x156 wheel spacers installed on your ATV or UTV gives it more stability and allows installation of larger traction tires. These 6061 billet aluminum wheel spacers come with pre-installed wheel studs. You can get 1.25 inches, 1.5 inches, or 2 inches of extra width per side for more stability and clearance. There’s no easier upgrade than adding wheel spacers atv.Similar vehicles often have different centerbore,bolt pattern and thread pitch, so Please Make Sure You Take The Proper Measurements Before Purchasing.
Description
- Increase clearance: Max Motosports Wheel spacers widen your vehicle wheel base, increasing stability and resistance to side roll-over.
- Improve Vehicle Stability: Added stability provides extra control for experienced riders, and an additional margin of safety for younger or less experienced riders.
- Increase Traction: Aluminum Wheel spacers increase tire to frame clearance allowing installation of wider wheels and high-traction mud,rock or snow tires.
- Easy Bolt-On Installation: Simply bolt the wheel spacer/adapter to your hub, then bolt your wheel to the spacer/adapter. No vehicle modification required.
- 10.9 Grade Hardened Steel Wheel Bolts: Forged,heat-treated and hardened 10.9 (SAE Grade 8) wheel bolts deliver strength and corrosion resistance.
6061-T6 Aluminum
Forged from 6061-T6 aluminum, each wheel spacer is treated with surface oxidation. Harder material with corrosion resistance.
4x156 Wheel Spacers
These 4x156 spacers position your wheels 1 inch outward,allow installation of wider wheels & tires and improve the look of your vehicle.
10.9 Class Studs
Max Motosports Wheel Spacers for ATVs and UTVs use high quality heart
treated 10.9 grade studs, which are less likely to break or rust.
Compatiblity
( Fits Most 4x156 Vehicles Like Belows,the compatibility information is for reference)
Polaris:
1989-1994 Big Boss 4x6 Front |
1993-2006 Big Boss 6x6 Front |
1986-2002 Cyclone Front |
1999-2006 Diesel 4x4 Front & Rear |
1996-1999 Magnum 2x4 Front |
2000-2005 Magnum 325 2x4 Front |
2002-2006 Magnum 325 2x4 Rear |
2000-2005 Magnum 325 4x4 Front |
2002-2006 Magnum 325 4x4 Rear |
1995-1998 Magnum 425L 4x4 Front |
1995-2005 Magnum 500 Front |
2002-2005 Magnum 500 Rear |
1993-2006 Magnum 6x6 Front |
2007-2009 Outlaw 450 Front |
2007-2009 Outlaw 525 Front |
2003 Predator 500 2x4 Rear |
2003-2007 Predator 500 2x4 Front |
1998-2009 Ranger Front & Rear |
2008-2012 RZR Front & Rear |
1995-2008 Scrambler 400L (2x4 & 4x4) Front |
1997-2009 Scrambler 500L (2x4 & 4x4) Front |
1994-1999 Sport 400L 2x4 Front |
1999-2008 Sportsman 335 4x4 Front & Rear |
1995-1998 Sportsman 400 Front |
2001-2011 Sportsman 400 Front & Rear |
1996-2011 Sportsman 500 Front & Rear |
2003-2011 Sportsman 600 4x4 Front & Rear |
2002-2011 Sportsman 700 4x4 Front & Rear |
2005-2011 Sportsman 800 4x4 Front & Rear |
1986-2002 Trail Blazer Front |
1986-2002 Trail Boss Front |
1990-1999 Trail Boss 2x4 350L Front |
1990-1999 Trail Boss 2x4 400L Front |
1987-1995 Trail Boss 4x4 250 Front |
1987-1995 Trail Boss 4x4 300 Front |
1990-1994 Trail Boss 4x4 350L Front |
1990-1994 Trail Boss 4x4 400L Front |
2000-2006 Xpedition 325 4x4 Front |
1999-2006 Xpedition 425 4x4 Front |
1990-1999 Xplorer 300 Front |
1995-2003 Xplorer 4x4 400L Front |
1996-2008 Xplorer 500 Front & Rear |
1996-1999 Xpress 300 Front |
1996-1999 Xpress 400L Front |
Yamaha:
1985-1989 YFM200DX Moto-4 Front |
1985-1992 YFM225 Moto-4 Front |
2008 YFM250R/RSPX/RSPX2 Raptor 250 Front |
1992-1998 YFB250/U Timberwolf 2x4 Front |
1987-1988 YFZ350 Banshee Front |
1989-1990 YFZ350 Banshee Front & Rear |
1991-2002 YFZ350 Banshee Front |
1987-1988 YFM350ER Front |
2004-2010 YFM350 Raptor Front |
1990-2004 YFM350X Warrior Front |
2004-2007 YFZ450/Balance/SE Front |
2001-2010 YFM660 Raptor Front |
2001-2010 YFM700 Raptor.2/GYTR/SE Front |
4x156 Wheel Spacers Specifications
- Quantity: 2pcs or 1 pair
- Thickness: Each Spacer would be 1'' Wide
- Color: Silver
- Centerbore: 131mm
- Bolt Pattern: 4x156mm
- Thread Pitch: 3/8-24x1 or 3/8"