SELECT YOUR VEHICLE
4x115 Wheel Spacers 2 inch 85mm Hub Bore M10x1.25 Studs For Arctic Cat Yamaha 4pcs
With Max Motosports Wheel Spacers for ATVs and UTVs,you can run the wheels you want. Our 1”, 1.5”, 2”, and 2.5" wheel spacers give your UTVs and ATVs a little extra width, and more width means more stability. We make them tough with 6061 billet aluminum,these wheel spacers atv are safe so that you can trust them to carry you through rough trails.So get installed and ride the way you want.
Description
- Increase clearance: Max Motosports Wheel spacers widen your vehicle wheel base, increasing stability and resistance to side roll-over.
- Improve Vehicle Stability: Added stability provides extra control for experienced riders, and an additional margin of safety for younger or less experienced riders.
- Increase Traction: Aluminum Wheel spacers increase tire to frame clearance allowing installation of wider wheels and high-traction mud,rock or snow tires.
- Easy Bolt-On Installation: Simply bolt the wheel spacer/adapter to your hub, then bolt your wheel to the spacer/adapter. No vehicle modification required.
- 10.9 Grade Hardened Steel Wheel Bolts: Forged,heat-treated and hardened 10.9 (SAE Grade 8) wheel bolts deliver strength and corrosion resistance.
Compatibility
Arctic Cat:
1999-2007 250-2WD/4WD Front&Rear |
1998-2003 300-2WD/4WD Front&Rear |
2002-2008 400i-2WD/4WD Front&Rear |
2011-2013 450i-4WD Front&Rear |
2002-2013 500i-4WD Front&Rear |
2004-2013 650i-4WD Front&Rear |
2007-2013 700i-4WD Front&Rear |
2008-2013 1000 Thundercat 4WD Front&Rear |
2006-2014 Prowler 4WD Front&Rear |
2012-2014 Wildcat 4WD Front&Rear |
Yamaha
2008 250 Raptor Rear |
1987-2005 YFM 350 XT Warrior Rear |
1987-1988 YFZ 350 T Banshee Rear |
1991-2006 YFZ 350 T Banshee Rear |
2004-2012 YFM 350 Raptor Rear |
2004-2012 YFZ450 2WD |
2001-2010 YFM 660 Raptor 2WD Rear |
2001-2010 YFM 700R Raptor 2WD Rear |
4x115 Wheel Spacers Specification
- Quantity:4pcs or 2 pairs
- Thickness:Each Spacer would be 2'' Wide
- Centerbore:85mm
- Bolt Pattern:4x115mm
- Thread Pitch: 10mm x 1.25 or 10x1.25 or M10x1.25
Customers Also Viewed
Your Dynamic Snippet will be displayed here...
This message is displayed because youy did not provide both a filter and a template to use.